Manufacturing website design that brings in quote requests
Manufacturing website design for machine shops, fabricators and molders. Buyers and engineers look you up before sending a drawing. We build the site that shows up when they search for what you make, proves you can make it and makes the quote request the obvious next step. You own it.
$5,000 to $40,000, fixed in writing before we start
Your website should bring in RFQs, not just sit there
Your site can win new accounts two ways: more of the buyers who land on it send a quote request, and more of them find it when they search for the part or process.
Most manufacturing web design stops at a newer look: a homepage slideshow, a capabilities list, a PDF line card and a contact page. The buyer moves on to the next supplier in the results.
Every site we build does both from day one.
Turns visits into quote requests
Pages follow how a buyer decides: what you make, proof you can make it, and the next step right beside it.
Shows up when buyers search
It loads fast, works on a phone, and is set up so Google can tell what each page is about.
Full Scope Metals
A metal fabricator’s site, built for the person ordering
They make roofing panels, trims and fasteners to spec for contractors. Their old site read like a generic supplier catalog, and none of the field knowledge that sets the shop apart came through.
We asked the people who order first
Before writing a word, we talked with contractors who buy from them and asked what they wished a supplier’s site told them. The homepage is written around their answers.
Products sorted by the job, not the SKU
Seven categories, grouped the way a contractor pulls material for a roof.
The quote request is the main action
Get a Quote sits in the header and on the opening screen, and every request reaches a person.
- Product categories
- 7
- On Google’s mobile speed test at launch
- 100/100
- The main thing the site asks for
- A quote request
Your buyers pull parts differently than roofers do. We’d start by asking them, too. Read the Full Scope Metals case study
A page for every process buyers search for
Buyers search for the work, not your name. They type the process, the part or the material, and Google sends them to the page that answers it best.
A single Capabilities page, one line per process, gives Google little to show for any of these.
| The search | Searches a month | The page that answers it |
|---|---|---|
| machine shop near me | 15,000 | yourshop.com/your homepage, town in plain view |
| metal fabrication near me | 5,000 | yourshop.com/metal-fabrication/ |
| contract manufacturing | 4,200 | yourshop.com/contract-manufacturing/ |
| cnc machining services | 3,200 | yourshop.com/cnc-machining/ |
| plastic injection molding | 2,400 | yourshop.com/injection-molding/ |
| precision machining | 2,300 | yourshop.com/precision-machining/ |
| metal stamping | 1,800 | yourshop.com/metal-stamping/ |
| laser cutting near me | 1,400 | yourshop.com/laser-cutting/ |
| prototype manufacturing | 900 | yourshop.com/prototyping/ |
Source: Ahrefs Keywords Explorer, US, pulled October 11, 2026.
What goes on each page
- What you make, and who you make it for
- The machines and equipment you run
- The sizes, materials and tolerances you really hold
- A quote button, so the next step is right there
Every process, material and industry you serve gets its own page like that, and your list will be your own. In industrial website design, this is the half that gets you found by buyers who have never heard your name.
Two people read your site before anyone calls you
Before a quote request goes out, an engineer checks whether you can make the part and a buyer checks whether you can deliver it. Most manufacturing sites answer neither, so both reach for the phone or the next supplier.
Tap Engineer or Buyer to see what each one checks on the sample page.
Capabilities
CNC machining
Milled and turned parts in metals and plastics.
Specifications Engineer
- Processes
- 3- and 5-axis milling, CNC turning
- Materials
- Aluminum, steel, stainless, plastics
- Tolerances
- The tolerances you hold, by process
- Equipment
- Your machine list and work envelopes
- Certifications
- Only the ones you hold
- Files we take
- STEP, DXF, PDF
Ordering Buyer
- Quantities
- Prototype to production
- Lead times
- Your typical times, by quantity
- Ships from
- Your town and state
- Quoting
- Attach a drawing, see when to expect a quote
- Who answers
- A named estimator and a direct line
We lay out every capability page so both find their answers in seconds, with the quote button right beside them. In website design for manufacturers, that layout is what turns a visit into a drawing in your inbox.
The quote request is the sale
Buyers who find you in a search often send a drawing before they call. So the quote form comes first in every manufacturing website design we do: it’s where the money starts.
Only what you need to quote
Name, company, email, what they need, how many, by when, and the drawing.
Straight to whoever quotes
Requests land in their inbox, file attached, and the buyer gets a note saying when to expect your reply. Every capability page gets a quote button.
Fast on a phone on the shop floor
We use Astro, a lean way to build websites: pages go out ready to show, with no WordPress plugins or page builders slowing them. Spec sheets, photos and the form load fast.
Two people build it, and you won’t have to write it
Bullfinch is two people, Kyle and Katie Rutten, and they do the work themselves. Nobody on your side has to be a writer or a marketer.
What the project asks of you
-
The call. 30 minutes about the work you want more of.
Your part 30 minutes
-
The quote. A fixed-scope quote in writing within a week of the intro call.
Your part Say go
-
Your files. Equipment list, certifications, line card, old catalog PDFs, photos of the floor and finished parts.
Your part Send what you already have
-
The writing. We talk with whoever quotes and write every page from that.
Your part Talk, don’t write
-
The review. Watch the site come together on a preview link.
Your part Approve every page
-
Launch. A typical site launches in about 60 days.
Fully remote, on Google Meet. More about Kyle and Katie
What a manufacturing website costs
We price manufacturing website design like every site we build: most land between $5,000 and $40,000. The build is one fixed price, not a monthly plan.
What moves it for a manufacturer
- Pages
- How many capability, product and industry pages you need
- Catalog
- Whether there’s a product catalog or a spec‑sheet library
- Quote form
- Where requests land: one person’s inbox or a shared mailbox
- Search and ads
- Whether you add ongoing SEO or Google Ads
How the price works
- In writing
- A fixed-scope quote within a week of the call.
- No hourly meter
- No surprise invoices once the scope is set.
- Yours, not rented
- The domain, the code and the hosting accounts are all yours.
- After launch
- We can host it and keep it updated, or hand it over clean.
Tell us what you make and we’ll scope it. Book a call
Questions manufacturers ask before they book
Short, plain answers to what usually comes up last. Anything else, ask it on the call.
-
Do we own the website?
Yes, every part of it. The domain, the code and the hosting accounts are yours, and you can take the site to another developer or host whenever you like.
-
Can our team add products and spec sheets?
Yes, any time. We set up a simple editor where your people can add a product, upload a spec sheet, swap a photo or change a line of text without touching code.
-
Do you know manufacturing, or will we have to teach you machining?
We’ve built for a fabricator already: Full Scope Metals, a custom metal roofing shop in Kremmling, Colorado. For your site, we learn your processes from the people who quote the work, write every page from what they tell us, and you approve each page before it goes live. If you also sell through distributors or to other companies' buyers, our B2B web design page shows how we build for that.
-
Will we lose what our current site ranks for?
We plan for it before launch. Every old page address is mapped to its new page and redirected, so Google and buyers with old bookmarks land in the right place instead of on an error page.
-
Can it handle a big catalog?
Yes. Products get a page each, or a page per product family when that’s how your buyers shop, and the page count is priced into your quote up front.
-
Do we need SEO or ads on top of the site?
Not to launch. From day one, your site loads fast, works on a phone, and is set up so Google can tell what each page is about. If you want more reach later, we can add ongoing SEO or Google Ads, but neither is required.
Book 30 minutes about your manufacturing website
Tell us which work you want more of and who buys it. We’ll say what we’d build and roughly what it takes.
- Today A 30-minute call on Google Meet
- Within a week Your fixed quote, in writing
- About 60 days Launch, once you say go
Every month the current site stays up, the buyers who check it before sending a drawing send it to the supplier whose site answered them.
Rather talk now? 720-299-8584 5.0 on Google
Manufacturing website design is one part of our web design service.